{"product_id":"erskine-epoxy-3337-60ml","title":"Erskine Epoxy 3337 60ml","description":"\u003cp\u003eCRYSTAL CLEAR 3337 ROD FINISH\u003c\/p\u003e\n\u003cp\u003eErskine Epoxy is a general duties fishing rod epoxy that dries clear and works with a 1:1 mix ration of epoxy to hardener. Erskine epoxy is perfect for all rod building duties including DIT guide repairs and replacements.\u003c\/p\u003e\n\u003cp\u003eHOW TO USE CRYSTAL CLEAR ROD FINISH #3337\u003c\/p\u003e\n\u003cp\u003e1. Measure equal parts (1:1) of Part A and Part B.\u003c\/p\u003e\n\u003cp\u003e2. Accurate measurements of resin and hardener are important, scales or measuring syringe recommended for mixing.\u003c\/p\u003e\n\u003cp\u003e3. If using syringe, use one without rubber plunger as this will affect the finish.\u003c\/p\u003e\n\u003cp\u003e4. Mix thoroughly using a popsicle stick or similar.\u003c\/p\u003e\n\u003cp\u003e5. Usable pot life is 20 minutes at 20 degrees Celsius.\u003c\/p\u003e\n\u003cp\u003e6. Apply mixture to thread with a clean brush.\u003c\/p\u003e\n\u003cp\u003e7. Bubbles may also be removed with heat once applied.\u003c\/p\u003e\n\u003cp\u003e8. A small rotisserie motor to turn the rod continually while drying should be used to prevent runs and sagging.\u003c\/p\u003e\n\u003cp\u003e9. Finish works best at room temp. 20 to 25 degrees Celsius.\u003c\/p\u003e\n\u003cp\u003eWorking with Epoxy\u003c\/p\u003e\n\u003cp\u003eErskine 3337 Epoxy resin is a versatile material beloved by rod building enthusiasts and hobbyists worldwide. With its ability to create a high-gloss, durable finish, 3337 epoxy is ideal for rod building in all its forms. Whether you’re a beginner or a seasoned craftsman, navigating the world of epoxy can be a sticky affair. Here are some tips and tricks to help you work with epoxy and achieve professional-level results every time.\u003c\/p\u003e\n\u003cp\u003e1. Safety First\u003c\/p\u003e\n\u003cp\u003eBefore using 3337 epoxy, make sure you’re wearing safety gear. Put on gloves, goggles, and a mask to stay safe from fumes and skin irritation. Work in a well-ventilated area and keep your space clean and tidy to avoid accidents.\u003c\/p\u003e\n\u003cp\u003e2. Measure Accurately\u003c\/p\u003e\n\u003cp\u003eAchieving the perfect epoxy mix starts with accurate measurement. Be sure to measure the resin and hardener in the correct ratio as mentioned in the product instructions. Inaccurate measurements can result in a tacky finish and compromise the durability of your project.\u003c\/p\u003e\n\u003cp\u003e3. Mix Thoroughly\u003c\/p\u003e\n\u003cp\u003eAfter measuring, mix the resin and hardener slowly and evenly for at least 2-3 minutes. Be sure to scrape the sides and bottom of the container to blend everything well. Mixing too fast can create air bubbles, so take your time.\u003c\/p\u003e\n\u003cp\u003e4. Be Patient with Bubbles\u003c\/p\u003e\n\u003cp\u003eBubbles can be a challenge when using epoxy. To reduce them, let the mixed epoxy sit for a few minutes so they can rise to the top. Then, gently run a heat gun or torch over the surface to pop the bubbles and get a smooth finish.\u003c\/p\u003e\n\u003cp\u003e5. Using Additional Heat\u003c\/p\u003e\n\u003cp\u003eEpoxy reacts to temperature, which can change how it cures. For the best results, work in a room with a steady temperature between 21-25°. If it’s too cold, the epoxy might not cure well; if it’s too hot, it could harden too fast and affect the finish. If 3337 epoxy feels too thick, you can warm it up in the microwave for a few seconds to make it easier to work with.\u003c\/p\u003e\n\u003cp\u003e6. Keep It Clean\u003c\/p\u003e\n\u003cp\u003eAfter application, ensure the surface remains dust and debris-free while the epoxy cures.\u003c\/p\u003e\n\u003cp\u003eCommon Mistakes When Working With Epoxy\u003c\/p\u003e\n\u003cp\u003eCRYSTALATION: This can happen in certain environemts, especially to hardner, if this happens, place bottle in glass of warm water for 5 min and it will return to normal state.\u003c\/p\u003e\n\u003cp\u003eIncorrect Mixing Ratios:\u003c\/p\u003e\n\u003cp\u003eOne of the most common mistakes is not mixing the epoxy resin and hardener in the correct ratio. This can lead to improper curing, resulting in a sticky or weak finish.\u003c\/p\u003e\n\u003cp\u003eIncomplete Mixing:\u003c\/p\u003e\n\u003cp\u003eFailing to mix the resin and hardener thoroughly can result in uneven curing and soft spots. It is essential to mix the components for the entire recommended time.\u003c\/p\u003e\n\u003cp\u003eBubbles:\u003c\/p\u003e\n\u003cp\u003eIntroducing air bubbles into the mixture and not removing them can affect the final finish. If you are not adding color \/ want a really clear pour, mix by hand, not with a mixer. Mixers add air bubbles. Using a torch or heat gun will help remove bubbles after pouring.\u003c\/p\u003e\n\u003cp\u003eTemperature Issues:\u003c\/p\u003e\n\u003cp\u003eEpoxy is super sensitive to temperature. If the working environment is too cold, it may not cure correctly. Conversely, if it’s too hot, the epoxy might cure too quickly, leading to a poor finish.\u003c\/p\u003e\n\u003cp\u003eMoisture Contamination:\u003c\/p\u003e\n\u003cp\u003eEpoxy does not bond well with moist or wet surfaces. Any moisture on the surface can result in a cloudy or weak bond.\u003c\/p\u003e\n\u003cp\u003eOver or Under Catalyzation:\u003c\/p\u003e\n\u003cp\u003eUsing too much or too little hardener can affect the curing process, leading to a finish that is either too soft or too brittle.\u003c\/p\u003e","brand":"Erskine","offers":[{"title":"Default Title","offer_id":43456827752511,"sku":"ISO-049","price":23.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1243\/6738\/files\/FINISH60.jpg?v=1782363450","url":"https:\/\/isofishinglifestyle.com.au\/products\/erskine-epoxy-3337-60ml","provider":"Isofishinglifestyle","version":"1.0","type":"link"}