Studio Ocean Mark Blue Heaven L105XH/75XH Magbrake

POWER SHOOTER MAGBRAKE SYSTEM

Mag Dial

Magnetic Brake System

Extra high gear (dynamic gear design)

MAG model dedicated spool

Drag lever for casting models

Round Bridge

Semi-waterproof drag

Carbon drag washer & stainless drag disc

Dynamic Gear Design

2 bearing pinion gear

Angular contact ball bearing with waterproof cap

Newly designed bearing holder

The 12mm inner diameter one-way clutch bearing, which contributed greatly to the compact design, boasts a stronger reverse load than the conventional 10mm inner diameter two-piece in series. A
large-diameter radial ball bearing and a waterproof oil seal are placed to sandwich this one-way clutch bearing.
This is a newly designed next-generation bearing holder that exhibits strong reverse load, powerful winding, and strong waterproof performance.

Lead Design

The outer edge of the gearbox has an irregular shape, allowing you to intuitively grasp the lever position without having to look at the reel.

AIR GLOBE SHAPE "EVA AG45" Handle Knob

GLOBE = Inherits the shape of a sphere and supports gripping at any angle.

Variable length bending handle arm

The previous model was changed from 110mm to a short 98mm, allowing for compact and quick reeling.
Duralumin material is used, and slits are provided in the arm to increase strength from the material and structure perspective.
*98mm is recommended, but the handle shaft hole for 85mm is also available. If used with 85mm, the preset knob and handle arm will interfere, so please purchase a height adjustment washer sold separately.

Super Spool Free

When the spool is free, two small diameter bearings support the spool, and when reeling, a large diameter ball bearing slides to firmly support the spool. A
completely new spool free system that utilizes the characteristics of the lever drag has been adopted to achieve a casting feel that does not strongly feel the rotational inertia.

Anti-reverse mechanism

When the handle rotates in reverse, which the one-way bearing cannot prevent, the anti-reverse mechanism (reverse stopper claw) comes into action to prevent the handle from rotating in reverse.

Line Up

Specification

* The MAGBRAKE model is designed for thicker lines of No. 6 or more, so if you use thin lines, the line may get caught between the spool and the frame. *Notice of correction to the instruction manual We have confirmed that there is an error in the specifications listed in the instruction manual for the BLUE HEAVEN L105XH, which was released on February 20, 2025. [Incorrect description] Gear ratio 6.8:1 (127cm) [Correct description] Gear ratio 7.1:1 (132cm) This is as shown in the above specification table.